Page 7 - Central fault indicating_units

Type of construction:
 Bay: Wall-mounted housing (PS) 233 x 200 x 99,5mm with hinge to
open the front panel (insert the label strips)
 Weight approx: 1.500g with rechargeable battery 2.700g
 Degree of protection: IP54, terminal box embossment for ports from behind + below
 Climatic conditions: 5 to +55°C, 5 to 85% relative humidity
 LED-display: 27 RGB LED
 Labelling: 3 exchangeable marking strips double spaced inscribable
 Function buttons: integrated buttons for test, horn and 2x acknowledge flashing
 Integrated horn: Piezo buzzer
Behind separate terminal cover:
 Connection: Screw terminal plug connection, max. 1,5mm²
 PC connection: USB-B socket
 Analogue telephone connection: RJ11 socket
 Ethernet: RJ45 socket
 Power supply: 230V AC (= 120-250V AC)
 Power loss: 15VA
 Max. back-up fuse: 10A L
 Internal fuse: Picofuse 1,6A slow
Inputs:
 Input level for signal inputs: 24V AC/DC 8mA, ± 15%, alternatively internal supplied with 24V
 Minimum signal duration: 10ms
Outputs:
 Output relays: 5x relay, 1 NO or NC contact, max. 250V 5A
including 1x relay output for horn, max. 250V 5A
 Horn acknowledge: Separate connection for acknowledging the horn
 Built-in Ethernet port with Web server for visualization
 EMC, immunity to interference: UNITRO-Standard in accordance with EN 61000
Option UPS:
 Rechargeable battery: Gas-proof, lead- gel rechargeable battery 24V 1,2 Ah
 Buffer time 100% ED: 3h
 Buffer time signal standby: 10h
 Connection for external battery: max. 2,2Ah
Option Tele:
 Analog telephone modem for 28 voice messages (Text to Speech)
Option LON- bus:
 FTT 10 2-wire output for parallel tableau and GLT connection
Configuration menu / Network configuration:
Parameter setting via USB port or Ethernet port (FTP) from Windows 7 Pro, the following parameters:
 Message as a fault or run signal (display only)  Message relevant or not relevant
 Message with horn, -horn without or with an  Quiescent current or operating current
automatic acknowledgment message
 Acknowledgeable new value message  Response delay variable for each signal
with 1 or 2 flash rates from 1-254sec
 24 messages (voice) every 17sec be digitally stored  4 relay contacts, NO or NC contact,
 4 Battery status messages: battery operation, inputs freely assignable to outputs
-defect, -low voltage and power recovery
 Message texts via TTS (Text To Speech)  Automatic cut-off horn max. 254sec
 Acknowledgment by front buttons on the unit,  Assignment of the 28 message texts
or telephone acknowledgement via acknowledg- on 6 connecting sections
ment code each with 4 numbers
 In case of non-acceptance or failure to
acknowledge the message forwarding  Basically with start text for each message,
and 7 text modules (acknowledge text)
announcement within 4 to play the numbers dialed
 LED colors available: red, green, yellow, blue  Delay of phone messages up to
 Ethernet network and FTP configuration max. 60 min

subject to change Page 114