MVE LON-bus Repeater
active signal converter for coupling max. 3x64 FTT10A modules, for DIN rail mounting
Type designation:
MVE Repeater
active signal amplifier for
transparent network connection of
max. 3x 64 nodes with FTT10A interfaces
System features:
- Metal snap-on housing 110 x 100 x 60mm high
- Degree of protection IP20
- Supply voltage: 230V AC, 5VA ± 10%
- Screw-type terminals, plug connection for connection max. 2,5mm²
- Active signal amplifier for transparent network connection of max. 3x 64 nodes with FTT10A (78kBit/s) interfaces
- Built-in switchable termination resistors:
3x 105Ω at bus topology (terminated at both ends)
3x 52,3Ω at free topology (closed on one side) - EMC-values: UNITRO-Standard in accordance with EN 61000
Connection diagram MVE Repeater
Technical data:
- Type of construction:
metal snap-on housing
110 x 100 x 60mm high
- Degree of protection:
IP20
- Weight:
approx. 500g
- Climatic conditions:
in accordance with UNITRO-Standard
- Connection:
screw-type terminals/ plug connection max. 2,5mm²
- Supply voltage:
230V AC, 5VA ± 10%
- LED-display:
operating LED green
LED yellow = traffic bus lines
- Bus connection:
3x FTT10A
- Sensitivity bus:
Umin 250 mVSS
- Function and transmission:
active signal amplifier for transparent network connection of max. 3x 64 nodes with FTT10A (78kBit/s) interfaces, max. 2.7km per
- Series connection:
max. 3 Repeater
- Bus termination:
built-in switchable termination resistors:
3x 105Ω at bus topology (terminated at both ends)
3x 52,3Ω at free topology (closed on one side)
- Leakage distances and clearances:
in accordance with UNITRO-Standard
- EMC, immunity of interference:
UNITRO-Standard,
in accordance with EN 61000
subject to change