LM 0/32
digital Output module for DIN rail mounting
Type designation:
LM 0/32
module for DIN rail mounting with
32x transistor outputs (source),
24V, 100mA, continuous signal and
clocked externally synchronized with
3 flash frequencies
System features:
- Snap-on housing for DIN rail mounting 195 x 128 x 45mm high
- Degree of protection IP20
- Connection:
- supply screw-type terminals/ plug connection 2,5mm²,
- outputs screw-type terminals/ plug connection 1,5mm²,
- LON-bus and flash synchronization RJ45 - Supply voltage: 24V AC/DC 3,3A ± 10%
- 32x transistor outputs (source), 24V, 100mA, continuous signal and clocked
externally synchronized with 3 flash frequencies - EMC-values: UNITRO-Standard in accordance with EN 61000
Connection diagram LM 0/32
Technical data:
- Type of construction:
snap-on housing
195 x 128 x 45mm high
- Degree of protection:
IP20
- Weight:
approx. 400g
- Climatic conditions:
in accordance with UNITRO-Standard
- Connection:
power supply:
screw-type terminals/ plug connection max. 2,5mm²
outputs:
screw-type terminals/ plug connection max. 1,5mm²
LON-bus + flashing synchronization: RJ45
- Function buttons:
reset button
service button
- Supply voltage:
24V AC/DC, 3,3A ± 10%
- Max. fuse:
4A medium slow
- LED-display:
power LED green
service LED yellow:
flashing = device not initialized
continuous light = error
for every output 1x green LED
- Neuron chip:
3150, 10 MHz + 64kB Flash-EEPROM
- Transmission:
LON FTT10A two wire (twisted-pair),
78kbps, max. 2,7km
- Bus connection:
isolated transceiver, 500V disconnecting insulation voltage
- Outputs:
32x transistor outputs (source), 24V, 100mA,
continuous signal and clocked
externally synchronized with 3 flash frequencies
separation voltage: intput 2000Vrms
- Leakage distances and clearances:
in accordance with UNITRO-Standard
- EMC, immunity of interference:
UNITRO-Standard,
in accordance with EN 61000
subject to change