LM 0/16 mod.1, mod.2, LM flash

digital Output modules for DIN rail mounting

Data sheet as PDF
Downloads for LM

Type designation:

LM 0/16 mod.1
module for DIN rail mounting with
16x transistor outputs, 24V DC, 250mA
(sink), continuous signal and clocked
externally synchronized with
2 flash frequencies

LM 0/16 mod.2
module for DIN rail mounting with
16x transistor outputs, 24V DC, 250mA
(source), continuous signal and clocked
externally synchronized with
3 flash frequencies

LM flash
module for DIN rail mounting with
2x transistor outputs, 24V DC, 3A
for flash synchronization

System features:

  • Snap-on housing for DIN rail mounting 145 x 111 x 50mm high
  • Degree of protection IP20
  • Screw-type terminals, plug connection or spring-loaded terminals for connection, 2,5mm²
  • 16x transistor outputs, 24V DC, 250mA (sink), continuous signal and clocked 
    externally synchronized with 2 flash frequencies (LM 0/16 mod.1)
  • 16x transistor outputs, 24V DC, 250mA (source), continuous signal and clocked 
    externally synchronized with 3 flash frequencies (LM 0/16 mod.2)
  • 2x transistor outputs, 24V DC, 3A for flash synchronization (LM 0/16 flash)
  • EMC-values: UNITRO-Standard in accordance with EN 61000

Connection diagram LM 0/16 mod.1 and 16/0 mod.2

Technical data:

  • Type of construction:
    snap-on housing
    145 x 111 x 50mm high

  • Degree of protection:
    IP20

  • Weight:
    approx. 300g

  • Climatic conditions:
    in accordance with UNITRO-Standard

  • Connection:
    screw-type terminals/ plug connection 
    or spring-loaded terminals max. 2,5mm²

  • Function buttons:
    reset button
    service button

  • Supply voltage:
    24V AC/DC, 100mA ± 10%

  • Max. fuse:
    4A medium slow

  • LED-display:
    power LED green
    service LED yellow:
    flashing = device not
    initialized continuous light = error
    LM 0/16 mod.1 and mod.2 for every output 1x red LED
  • Neuron chip:
    3150, 10 MHz + 64kB Flash-EEPROM

  • Transmission:
    LON FTT10A two wire (twisted-pair), 
    78kbps, max. 2,7km

  • Bus connection:
    isolated transceiver, 500V disconnecting insulation voltage

  • Output contacts LM 0-16 mod.1:
    16x transistor outputs, 24V DC, 250mA (sink),
    continuous signal and clocked externally synchronized
    with 2 flash frequencies
    separation voltage 2000Vrms
    optional opto-mos output (short circuit)

  • Output contacts LM 0-16 mod.2:
    16x transistor outputs, 24V DC, 250mA (source),
    continuous signal and clocked externally synchronized
    with 3 flash frequencies
    separation voltage 2000Vrms

  • Output contacts LM flash:
    2x transistor outputs 24V DC, 3A for flash synchronization

  • Leakage distances and clearances:
    in accordance with UNITRO-Standard

  • EMC, immunity of interference:
    UNITRO-Standard, 
    in accordance with EN 61000

subject to change