LED area lights
for illuminating surfaces for optical inspection systems
Type designation:
50/50-R area light
with 144 LED
62 x 60 x 10mm
100/100-R area light
with 576 LED
112 x 110 x 10mm
Function / use
- Cost-effective lighting for illuminating surfaces for optical inspection systems
Controls and displays
- LED area lights with 144 or 576 LED and diffuser
- Standard LED red, other colors on request
Supply voltage
- 12V DC ± 10%, or 24V DC ± 10%
50/50-R: 250mA, 100/100-R: 1000mA
Electrical characteristics
- Pulse-pause ratio during continuous operation 80/20
- EMC-values: UNITRO-Standard in accordance with EN 61000
Mechanical characteristics
- area quadratic with diffuser,
50/50-R with 144 LED: 62x60x10mm
100/100-R with 576 LED: 112x1100x10mm - 2-pin DIN connector, cable length 1m, leaving above
Technical data:
- Type of construction:
area quadratic with diffuser
50/50-R with 144 LED: 62x60x10mm
100/100-R with 576 LED: 112x1100x10mm
- Degree of protection:
IP20
- Weight:
50/50-R: approx. 110g
100/100-R: approx. 240g
- Climatic conditions:
in accordance with UNITRO-Standard
- Connection:
2-pin DIN connector,
cable length 1m, leaving above
- Supply voltage:
12V DC ± 10%, 24V DC ± 10%
50/50-R: 250mA
100/100-R: 1000mA
- Pulse-pause ratio during continuous operation:
80/20
- Color / wavelength:
LED red: 660nm
LED yellow: 585nm
LED green: 570nm
- Leakage distances and clearances:
in accordance with UNITRO-Standard
- EMC, immunity of interference:
UNITRO-Standard,
in accordance with EN 61000
subject to change