FSB 16-P USB - OUTR

flashing alarm annunciator units with signal storage

programmable via USB, for front panel installation, 16 signal inputs

Data sheet as PDF
back to the function criteria (Level 4)
back to the design criteria
Downloads for FSB 16-P USB - OUTR

Type designation:

FSB 16-P USB - OUTR
flashing alarm annunciator
16 signal inputs and relay output module,
outputs freely assignable for each signal

Programmer

FSB 16: front panel installation

Controls and displays

  • Bright 5mm LED display
  • Status indicator (green = Power ON)
  • Easily exchangeable label strips
  • Integrated functional buttons 
    (+ external) + LED-Test

Parameterization

  • via rear integrated Mini USB interface for parameterization each signal:
    - quiescent / operating current,
    - running- / alarm,
    - assignment of the outputs
    - response delay variable max. 10min,

    overall: new alert / first alert

Electrical characteristics

Mechanical characteristics

  • Compact plastic junction housing
    96 x 96 x 85 + 25mm, degree of protection: front IP50
  • Connection: Screw-type terminals,
    plug connection max. 2,5mm²

FSB 16-OUTR: snap-on module

Controls and displays

  • LED display yellow (19x relay state),
    illuminated when relay contacts are closed
  • LED yellow and red for internal data bus
    (flashing yellow on intact data transfer,
    continuous red light at fault)
  • Status indicator (green = Power ON)

Electrical characteristics

  • 16 potential-free normally open, all poles led out relay contacts,
    groupable on up to 2 contact groups with common root contact via integrated jumpers
  • 2x group alarm outputs change-over
    with “device-disturbed" monitoring, 
    various settings are possible by means of programming software
  • 1x horn output change-over,
    various settings are possible by means of programming software
  • EMC-values: UNITRO-Standard in accordance with EN 61000
  • Relay contact rating:
    24-250V AC, 2A / 110V DC, 0,5A / 220V DC, 0,3A

Mechanical characteristics

  • Snap-on housing 200 x 100 x 60mm, degree of protection IP20
  • Connection: Screw-type terminals,
    plug connection max. 2,5mm²

Connection diagrams FSB 16-P USB - OUTR

Technical data:

  • Type of construction:
    FSB 16: 
    control board housing 96 x 96 x 85 + 25mm 
    (cutting for installation 92 x 92 + 1mm)
    FSB 16-OUTR: 
    snap-on housing 200 x 100 x 60mm

  • Degree of protection:
    FSB 16: front IP50 (option IP54), rear IP20
    FSB 16-OUTR snap-on housing IP20

  • Weight:
    FSB 16 approx. 400g
    FSB 16-OUTR approx. 500g

  • Climatically conditions:
    in accordance with UNITRO-Standard

  • Connection:
    screw-type terminals/ plug connection max. 2,5 mm²

  • Front panel buttons:
    acknowledge horn
    acknowledge flash light
    LED test

  • Supply voltage:
    24V AC/DC or
    48-60V AC/DC or
    110/125V AC/DC or
    220/240V AC/DC
    voltage-adapted

  • Max. fuse:
    4A medium slow

  • Input level for signal inputs:
    48/60V DC -10% +15% max. 2,5mA
    110/125V DC -10% +15% max. 2,5mA
    220V DC -10% +15% max. 2mA
    voltage-adapted
    voltage tolerance ±10%

  • Minimum signal duration:
    DC: 10ms

  • Data retention in the absence of power:
    flash memory

  • Power loss 100% ED:
    60V DC max. 4,5W
    110V DC / 220V DC max. 5,9W
  • LED display:
    FSB 16 control board housing, labeled with marking strips:
    - alarm new alert: red flash light
    - alarm acknowledge: red steady light
    - alarm removed: LED dark

    status LED (power on) = green steady light

    FSB 16-OUTR snap-on housing: 
    - power on LED: green steady light
    - data LED: yellow flash light
    - data error LED: red steady light
    - relay contact LED: yellow

  • Flashing frequencies:
    alarms 2Hz / 0,5Hz

  • Relay outputs:
    16 full potential-free normally open contacts,
    the input messages about software as assigned
    (assigned to Standard 1:1) 
    (reduced by jumpers on 4 common roots)

    2x group alarm messages and 1x horn contact,
    potential-free change-over,

    max. contact conditions-carrying capacity: 
    24-250V AC, 2A / 110V DC, 0,5A / 220V DC, 0,3A

  • Parameterization:
    via rear Mini USB interface 
    per input:
    - running- / alarm 
    - quiescence- / operation current 
    - switch on delay max. 10min
    - assignment of the output contacts

    overall: first up / new alert

  • Leakage distances and clearances:
    in accordance with UNITRO-Standard

  • EMC, immunity of interference:
    UNITRO-Standard, 
    in accordance with EN 61000

subject to change