Compact front panel mounting alarm indicating unit FR 6 USB PSC
programmable, for 6 signals
Controls and displays
- Bright 5mm LED display
- Separate status indicator (green = power ON)
- Easily exchangeable label strips
- Integrated functional buttons
Parameterization
- UCan be parameterized via the rear mirco USB interface
- Acknowledgeable new alert/first alert flash warning with 1 or 2 flash rates
all sequences ISA-18.1-1979 (R2004) and DIN 19235 - Quiescent / operating current – for each signal
- Inputs freely assignable to outputs for each signal
- Response delay variable for each signal, 50ms to 10min
Electrical characteristics
- 6 signal inputs 2-pole, max. 230V AC / 220V DC with filter switching and electrical isolation
- Resolution and switching precision ≥ 1ms
- EMC-values: Higher immunity levels to UNITRO-EVC-Standard
- Potential-free outputs: relay change-over max. 5A 250V AC, 3A 30V DC (resolution ≥10ms)
- Group signal outputs: relay change-over max. 5A 250V AC, 3A 30V DC
- States saved to memory on power failure
Mechanical characteristics
- Compact plastic junction housing in accordance with IEC 61554 (96 x 96 x 120 + 25mm)
- Connection: Screw-type terminals, plug connection max. 2,5mm²
Option
- Horn output with buzzer: relay change-over max. 5A 250V AC, 3A 30V DC
Technical data:
- Type of construction:
control board housing plastic
96 x 96 x 120 + 25mm
(cutting for installation: 92 x 92 + 1mm)
- Degree of protection:
front IP50 (option IP54), rear IP20
- Weight:
approx. 450g
- Climatically conditions:
in accordance with UNITRO-PSC-Standard
- Connection:
screw-type terminals/ plug connection max. 2,5mm²
- Supply voltage:
24V AC/DC to 230V AC/DC
voltage-adapted
- Alarm signal nominal voltage:
24V AC to 230V AC
24V DC to 220V DC
voltage-adapted
voltage tolerance ±15%
- Input level for signal inputs:
24V AC/DC ± 10% - 15% 1,7mA
60V DC ± 10% - 15% 2mA
110V DC ± 10% - 15% 1,4mA
220V DC ± 10% - 15% 1,1mA
230V AC ± 10% - 15% 1,2mA
- Data retention in the absence of power:
in EEPROM
- Minimum signal duration:
1ms
- LED display:
labeled with exchangeable marking strips
1 flash frequency:
- alarm new alert = red flashing
- alarm acknowledge = red steady light
- alarm removed = LED off
- alarm Reset = LED off
2 flash frequency:
- alarm new alert = red fast flashing
- alarm acknowledge = red steady light
- alarm removed = red slow flashing
- alarm Reset = LED offoperating-LED (power on)= green steady light
- Flashing frequencies:
2Hz / 0,5H
- Power loss 100% ED:
max. 2W + 1,5W
attention: from 110V take care for enough ventilation!
- Relay outputs:
max. 5A 250V AC,
3A 30V DC
- Parameterization:
via FR 6-USB programmer software
- Leakage distances and clearances:
in accordance with UNITRO-PSC-Standard
- EMC, immunity of interference:
UNITRO-PSC-Standard, immunity higher
degrees of severity according to the
actual generic standards DIN EN 61000
subject to change