CC24plus LC Compact Central Fault Indicating Unit

wall-mounted housing (replaced CC8 / 16)

Data sheet as PDF
Downloads for CC24plus LC

Type designation:

CC24plus LC
central fault indicating unit for
24 message lines with LED-display,
first- or new value flash warnings
two flashing frequencies
(ISA-18.1/DIN 19235)

Controls and displays

  • Bright 5mm LED-display (red)
  • Operating LED green
  • Easily exchangeable label strips
  • Integrated mini horn and functional keys

Parameterization

  • Built-in USB port for parameterization from Windows 10 Pro
  • Operation, fault per message
  • Quiescent / operating current, relevant / irrelevant – for each signal
  • First- or new value flash warning with 1 or 2 flash rates
  • Response delay variable for each signal from 1s to 254sec
  • 2 relay contacts, NO or NC contact, inputs freely assignable to outputs

Electrical characteristics

  • 24 message lines 2-pin 24V AC/DC, 8mA ± 15%, (alternatively internal supplied with 24V)
  • Acknowledgeable new value flash warning with 1 or 2 flash rates
    all sequences ISA-18.1-1979 (R2004) and DIN 19235
  • Minimum signal duration 10ms
  • EMC-values: UNITRO-Standard in accordance withEN 61000
  • Outputs:
    2x relay, 1 NO or NC contact, max. 250V 5A
  • Separate connection for acknowledging the horn

Mechanical characteristics

  • Wall-mounted housing PS 233 x 200 x 99,5mm with hinge for front panel
  • Screw terminal plug connection, max. 1,5mm²
  • Extended terminal compartment with embossed for cable glands from behind and below

Connection diagram CC24plus LC

Type of construction:

  • Bay: Wall-mounted housing (PS) 233 x 200 x 99,5mm with hinge to open the front panel (insert the label strips)
  • Weight approx: 1.500g
  • Degree of protection: IP54, terminal box embossment for ports from behind + below
  • Climatic conditions: -5 to +55°C, 5 to 85% relative humidity
  • LED-display: 25 LED (24x red / 1x green)
  • Labelling: 3 exchangeable marking strips double spaced inscribable
  • Function buttons: integrated buttons for test, horn and 2x acknowledge flashing
  • Integrated horn: Piezo buzzer

Behind separate terminal cover:

  • Connection: Screw terminal plug connection, max. 1,5mm²
  • PC connection: USB-B socket
  • Power supply: 230V AC (= 120-250V AC)
  • Power loss: 15VA
  • Max. back-up fuse: 10A L
  • Internal fuse: Picofuse 1,6A slow

Inputs:

  • Input level for signal inputs: 24V AC/DC 8mA, ± 15%, alternatively internal supplied with 24V
  • Minimum signal duration: 10ms

Outputs:

Configuration menu / Network configuration:
Parameter setting via USB port from Windows 10 Pro, the following parameters:

  • Message as a fault or run signal (display only)
  • Message with horn, -horn without or with an automatic acknowledgment
  • Acknowledgeable new value message with 1 or 2 flash rates
  • Quiescent current or operating current message
  • Response delay variable for each signal from 1–254sec
  • 2 relay contacts, NO or NC contact,
    inputs freely assignable to outputs

  • Message relevant or not relevant
  • Automatic cut-off horn max. 254sec

subject to change