Installation options for eurocard format
19“ racks in various forms
Rack 19 / 8 M * rack 19 / 10 M
Mounting plate construction with screw terminal connections
mounting dimensions:
see dimension sketch, D=200mm
slots:
rack 19 / 8 M, 8 card slots with 10M and 4M empty space
rack 19 / 10 M, 10 card slots with 8M and 4M empty space
connection: front terminal connections max. 1,5mm², 32-pin female connector according to DIN 41612 / design D
Rack 19 / 8 R * rack 19 / 10 R
19“ mounting frame with screw terminal connections
mounting dimensions:
see dimension sketch, D=200mm
slots:
rack 19 / 8 R, 8 card slots with 10M and 4M empty space
rack 19 / 10 R, 10 card slots with 8M and 4M empty space
(the 4M empty space is seen from the left in front rack. The empty space can not be used as place cards)
connection: rear terminal connections max. 2,5mm², 32-pin female connector according to DIN 41612 / design D
Rack 19 / 10 L * rack 19 / 21 L
19“ mounting frame with solder
mounting dimensions:
see dimension sketch, D=210mm
slots:
rack 19 / 10 L, 10 card slots with 8M and 4M empty space
rack 19 / 21 L, 21 card slots with 4M
connection: rear female connectors with solder tails, 32-pin female connector according to DIN 41612 / design D
Rack 19 / 10 W * rack 19 / 21 W
19“ mounting frame with wrap connectors
mounting dimensions:
W + H see dimension sketch, D=210mm
slots:
rack 19 / 10 L, 10 card slots with 8M and 4M empty space
rack 19 / 21 L, 21 card slots with 4M
connection: : rear female connectors with 1mm wrap post, 32-pin female connector according to DIN 41612 / design D
Rack 19 / Z * rack 19 / Z-ÜS
19“ mounting frame with Z-angle
mounting dimensions:
W + H W + H see dimension sketch,
at rack 19/Z: D=210mm
at rack 19/Z-ÜS: D=270mm
construction: rear Z-profile rail for installation of 32-pin female
connectors according to
DIN 41612 / design D
- without female connectors and without card guides
- design rack 19/Z for female connectors with solder or 1mm wrap-post
- design rack 19/Z-ÜS for female connectors with 1mm wrap post, posts for connecting adapter plugs ÜS 32/32
Rack 19 / 21 BUS
19“ mounting frame with backplane
mounting dimensions:
W + H see dimension sketch, D=270mm
slots:
21 card slots with 4M with cross wiring backplane
connection: female connectors for female connectors with 1mm wrap post,
posts for connecting adapter plugs ÜS 32/32
Panel housing
Design: rugged steel chassis with front black cover frame
Alternatively:
detachable plastic transparent door and door lock (IP55/see picture 3) additional depth to the front about 22mm (without key)
Installation form: Installation in control cabinet cutout using mounting clips
Standard sizes:
SE1:
installation width: 12M
nominal: 72 x 144 x 200mm
cutting for installation: 66 x 138mm
SE2:
installation width: 26M
nominal: 144 x 144 x 200mm
cutting for installation: 138 x 138mm
SE3:
installation width: 54M
nominal: 288 x 144 x 200mm
cutting for installation: 282 x 138mm
Intermediate sizes:
SE4:
installation width: 16M
nominal: 96 x 144 x 200mm
cutting for installation: 90 x 138mm
SE5:
installation width: 35M
nominal: 192 x 144 x 200mm
cutting for installation: 186 x 138mm
Accessories for
panel housing and 19 "rack
- adapter plug ÜS 32/32 with 2.5m color-coded cables
Ölflex 32x 0.25mm ²(see picture 4)
dimensions of the connector housing
h = 10,2mm, w = 11,5mm, d = 61,5mm - female connector with solder(see picture 1 and 4)
- female connectors with 1mm wrap post(see picture 1 and 4)
- single part of bus for 32-pin plug-in card space with rear screw terminals 8M (see picture 7)
- as above, with additional 1mm wrap posts
picture 7
Accessories for signal cards
- anodized aluminum front panels
- laminated plastic front panels, label strip with clear window for 6-12M
picture 8
Plug-in card block for single-socket mounting
- each block has 32 screw terminals for wire sizes up to 2.5mm²
- the fixing is done simply by screwing it to the surface
- snap-on mounting on DIN-rail as an option
picture 9
Wall-mounted housing
49M: L 280 x W 200 x D 260mm with transparent cover (IP55) for 4 card slots with 12M or 12 card slots with 4M
alternatively:
30M: L 195 x W 200 x D 260mm with transparent cover (IP55 / see picture 10) for 7 card slots with 4M
picture 10
subject to change